Should you update?
Released 12 September 2026. Whether to move depends on who you are.
| A student mid-course | Only if your course allows it | A file saved in 5.0.0 does not open in classic 2.7.1 (F04). Ask your teacher or TA which version they grade with. |
|---|---|---|
| A teacher | Yes for a new term, after testing your lab files | Open each lab file and run its test vector first. The command-line test still exits 0 on a failure (F17), so check your autograder. |
| A hobbyist | Yes | Check any design that writes to RAM, see the next section. |
No rows match.
The change that can break your circuit: RAM line enables
The project’s change log says RAM line-enable inputs now write only when they are enabled. A design that left those inputs unconnected and relied on the old behaviour may stop storing values. We have not yet built a before and after circuit for this, so we cannot show you the difference.
Find Action: search every menu command
Open it from Help, then Find Action, or press Ctrl+Shift+A. We measured both, and the menu list is in F46. It lists menu commands as “File › New” and shows the shortcut beside each. The Linux lab counted 194 actions from 2 providers (F47); the Windows runner showed 185 results from 2 providers in the screenshot below, so expect the count to differ by system. The project’s notes also say you can press Shift twice, and that Find Action can place components; we did not test either.
The Find Action dialog open over Logisim-evolution 5.0.0 on a Windows desktop. A search box reads Type to search actions and a list below starts with File, New, File, Merge and File, Open. The footer reads 185 results, 2 providers.
Dark themes
The release notes say dark-theme support is much better: the canvas, grid and wire colours follow the theme. We have not compared themes ourselves, so we show no side-by-side. A setting that follows your system’s light or dark mode is on the development branch and not in 5.0.0. See Interface and shortcuts when that page is available.
Other things you will notice
- Preferences has ten tabs: Experimental, Software, FPGA Commander Settings, Hotkey settings, Autosave, Template, International, Window, Layout and Simulation. The International tab lists twelve languages and a gate shape choice of ANSI or IEC (F47).
- Export Image offers PNG, GIF, JPEG, TikZ and SVG (F47).
- After you open a file, wires stay grey and pins read 0 until you click the canvas or press Ctrl+R. This is not in the change log. See wire colours (F45, F49).
The Preferences window of Logisim-evolution 5.0.0 on the International tab. Tabs read Experimental, Software, FPGA Commander Settings, Hotkey settings, Autosave, Template, International, Window, Layout and Simulation. A Gate shape drop-down shows ANSI, and a Language list names twelve languages.
The Export Image dialog of Logisim-evolution 5.0.0 showing the circuit main, image formats PNG, GIF, JPEG, TikZ and SVG with PNG selected, a scale factor of 100 percent and a Printer View check box ticked.
New components
From our component list, parts whose first release is 5.0.0:
| Image | Base | Places a bitmap picture in a circuit or a subcircuit appearance (added 5.0.0). |
|---|---|---|
| Floating Point Constant | Floating-point arithmetic | Outputs a fixed IEEE floating-point value. |
| Matrix Keypad | Input/Output | 4x4 row/column keypad that a circuit scans like real hardware. |
| Real-Time Clock | Input/Output | Outputs current Unix-epoch time (ms or s) as a 64-bit value. |
| 2-Pin LED | Input/Output Extra | LED with separate anode and cathode pins. |
| Two-Way Switch | Input/Output Extra | Changeover switch selecting one of two paths. |
| 74173 | TTL | 4-bit D-type registers with 3-state outputs |
| 7438 | TTL | Quad 2-input NAND gate (open-collector) |
| 7476 | TTL | Dual J-K Flipflops with preset and clear |
| 7493 | TTL | 4-bit binary ripple counter |
No components match.
The change log also lists a signed and unsigned option for the Multiplier, a TTL 7447 whose BI/RBO pin works as input and output so displays can cascade, and a Random Generator that now uses the full 64 bits. See the component reference.
Working with files and projects
The change log lists merging selected circuits, exporting circuits together with the ones they depend on, a conflict dialog, dragging a file into the window to open it, and zoom remembered per circuit. We did not test these. For how files differ between versions see the circuit file guide, and for merging see Libraries and merging when it is available.
Timing diagram and appearance fixes
The notes list fixes to timing-diagram export (vector and GIF), support for clocks that are not 50 percent duty cycle, and improvements to editing custom appearances. We tested appearance editing in the subcircuits guide; we did not test the timing-diagram export.
Command line changes
- Several
--loadmemories can be used at once. The argument order rule is in F16. --fpga-cable <name>selects the Quartus cable.- The notes say invalid options now exit with a non-zero code. In our run, a missing file exited 255 (F92).
- Multi-bit pins show their width in the
--tty tableheader, for exampleA[4] D[8]in our ROM run (F92 lab folder). - Test-vector failures still exit 0 (F17, F92). An autograder must read the
Passed:line.
See Command line reference and Test vectors when available.
Packaging changes
- New portable Windows zips for x64 and ARM64 (F24); we hashed them but did not run them.
- The
.debinstalls and runs in a Debian 12 container (F59). - Each installer carries a different Java runtime (F27).
- The Intel Mac DMG contains a development build (F30); see the notice.
Where 5.0.0 is available besides GitHub, as we found it on 9 Nov 2026: winget installs the MSI (F56); Chocolatey and Scoop install the jar and need Java 21 (F57); Flathub has 5.0.0 with its own Java 21 (F52); the AUR -bin package is at 5.0.0 but its Java requirement is wrong (F55). The Snap is still 3.8.0 (F53).
How to update
The steps for each system are in the release history. For the install guides, see Windows, Mac and Linux.
For FPGA boards and the Synthesize & Download window, see the FPGA guide.
Generated HDL and VHDL entities are covered in VHDL and Verilog.