Tool.circ Viewer and InspectorOpen a .circ without installing Logisim and see which version saved it, its libraries, pins and labels, and whether it will open in your version. Example result: “Saved by Logisim-evolution 5.0.0. Will it open in 2.7.1? No: FPArithmetic.” Works with 5.0.0 and 2.7.1 files. Tested in a browser against files we ran in Logisim (F02, F04).ToolMemory Image GeneratorTurn numbers, text or bit fields into a ROM or RAM image that loads first time, or check an image you already have. Example output:
v2.0 raw, then 11 22 33 44. Writes v2.0 raw, v3.0 hex and a ROM .circ. Outputs loaded in Logisim-evolution 5.0.0 on 11 Nov 2026 (F88).ToolTruth Table and K-Map to CircuitTurn an expression, truth table or minterm list into minimal expressions, a K-map and a wired .circ. Every generated circuit was run in Logisim 5.0.0.ToolTest Vector Builder and CheckerRead your pins from a .circ, build a vector with hex, don’t-care and sequential steps, or check a file with the rules Logisim applies. Checked against 161 files run in Logisim 5.0.0.Tool7-Segment Decoder GeneratorMake the segment table, equations, ROM image and a ready .circ for Logisim’s 7-Segment Display. Generated files were run in Logisim 5.0.0.ToolVersion and Download PickerTell it your system and course and get the right Logisim and download link. Tested in emulated browsers for Windows, Mac, Linux and iPad.Tools built into our guides
Two tools live inside the guide that explains them, because the explanation and the tool belong together.
In a guideWire Colour ExplainerPick the colour you see and get the cause and the fix, with a broken and a fixed circuit.In a guideSplitter VisualiserSet Bit Width In and Fan Out and see which bit goes to which end. Checked against Logisim on 20 configurations (F84).
Which tool do I need?
Show all paths
- What do you have? A .circ file I cannot open, or do not know the version of → .circ Viewer
- What do you have? A program or table to put in a ROM or RAM → Memory Image Generator
- What do you have? My circuit shows red, blue, orange or grey wires → Wire Colour Explainer
- What do you have? A bus I need to split or join → Splitter Visualiser
- What do you have? I need to know which Logisim to install → Version and Download Picker
How we build and check these tools
- Outputs are opened in real Logisim during acceptance testing. The test scripts are in the project and described on How we test.
- Everything runs in your browser. Nothing is uploaded.
- The memory formats follow what Logisim did with our test files (F14, F15), and the splitter rules follow what we measured (F11, F84).
- If an output is wrong, tell us on the contact page and see corrections.
What we chose not to build
We did not build a file version converter: a wrong conversion could silently break graded work, so the .circ file page explains safe manual steps instead. We did not build a binary or hex converter or a clock calculator, because plenty exist, or a Logisim-to-Verilog converter, because Logisim-evolution exports HDL itself (HDL export).