Menu

Theme

Learn and fix · Reference · CHECKED ON 5.0.0

Logisim interface, keyboard shortcuts and preferences

How to zoom in Logisim: hold Ctrl and turn the mouse wheel, or the zoom slider at the bottom left of the window. Rotate a selected component with the arrow keys. Undo is Ctrl+Z and redo Ctrl+Shift+Z (⌘Z and ⇧⌘Z on a Mac). Every shortcut can be changed in File, Preferences, Hotkey settings (on a Mac: Logisim-evolution, Settings), and the full list we read from the menus is below.
FOR
Beginners and regular users · Logisim-evolution 5.0.0
CHECKED
11 Nov 2026
Checked against Logisim-evolution 5.0.0 on 3 machines
On this page

The main window

LAB lab-lnx · Linux lab5.0.02026-11-09

The Edit menu of Logisim-evolution 5.0.0 open over the circuit window. Its items include Can't Undo, Undo History, Can't Redo, Redo History, Clear Undo/Redo History, Cut, Copy, Paste, Delete, Duplicate, Select All, Raise Selection and Lower Selection, with Ctrl shortcuts beside most of them.

The Edit menu on the Linux lab (F46).lab-lnx-le500-menu-edit-01
The Edit menu of Logisim-evolution 5.0.0 with Undo, Cut, Copy, Paste, Select All and more.

From the top: the menu bar (File, Edit, Project, Simulate, FPGA, Window, Help), the Design and Simulate tabs, the component tree with a Filter box under it, the Properties and State tabs, and the canvas with the zoom slider. The Design and Simulate tabs, the tree, the filter box and the zoom controls are visible in our main window screenshots. Messages such as Incompatible widths and Oscillation apparent are covered in wire colours and Oscillation apparent.

The sidebar disappeared

The Window menu has Show Toolbar and Show Navigation Pane items (F46); turn them back on there. We did not test the “reset window layout” button in Preferences, so we do not describe it.

Find any command

Help, then Find Action, or CtrlShiftA (⌘⇧A on macOS). It lists menu commands by their path. See what is new in 5.0.0 for the counts we saw and a screenshot.

Keyboard shortcuts

33 menu items, read from the menus of 5.0.0. “Pressed in the lab” means we sent the keys on the Linux lab and saw the effect (6 rows, F94). “Seen in the menu” means the menu showed the shortcut and we did not press it. The Mac column comes from the menus on a macOS 15 runner (F62, F64); where a Mac menu was not captured it says so. We tested nothing on Windows.

Logisim-evolution 5.0.0 keyboard shortcuts
NewFileCtrl+N⌘NWin/Linux: Seen in the menu
Mac: Seen in the menu
Merge…FileCtrl+M⌘MWin/Linux: Seen in the menu
Mac: Seen in the menu
Open…FileCtrl+O⌘OWin/Linux: Seen in the menu
Mac: Seen in the menu
CloseFileCtrl+Shift+W⇧⌘WWin/Linux: Seen in the menu
Mac: Seen in the menu
SaveFileCtrl+S⌘SWin/Linux: Seen in the menu
Mac: Seen in the menu
Save As…FileCtrl+Shift+S⇧⌘SWin/Linux: Seen in the menu
Mac: Seen in the menu
Export project bundle…FileCtrl+Shift+E⇧⌘EWin/Linux: Seen in the menu
Mac: Seen in the menu
Export Image…FilenonenoneWin/Linux: No shortcut shown
Mac: No shortcut shown
Print…FileCtrl+P⌘PWin/Linux: Seen in the menu
Mac: Seen in the menu
Exit (Quit on a Mac)File (Mac: app menu)Ctrl+Q⌘QWin/Linux: Seen in the menu
Mac: Seen in the menu
Preferences… (Settings… on a Mac)File (Mac: app menu)none⌘,Win/Linux: No shortcut shown
Mac: Seen in the menu
UndoEditCtrl+Z⌘ZWin/Linux: Pressed in the lab
Mac: Seen in the menu
RedoEditCtrl+Shift+Z⇧⌘ZWin/Linux: Pressed in the lab
Mac: Seen in the menu
DuplicateEditCtrl+D⌘DWin/Linux: Pressed in the lab
Mac: Seen in the menu
CutEditCtrl+Xnot capturedWin/Linux: Seen in the menu
Mac: Not captured
CopyEditCtrl+Cnot capturedWin/Linux: Seen in the menu
Mac: Not captured
PasteEditCtrl+Vnot capturedWin/Linux: Seen in the menu
Mac: Not captured
Select AllEditCtrl+A⌘AWin/Linux: Seen in the menu
Mac: Seen in the menu
Raise SelectionEditCtrl+Upnot capturedWin/Linux: Seen in the menu
Mac: Not captured
Lower SelectionEditCtrl+Downnot capturedWin/Linux: Seen in the menu
Mac: Not captured
Raise To TopEditCtrl+Shift+Upnot capturedWin/Linux: Seen in the menu
Mac: Not captured
Lower To BottomEditCtrl+Shift+Downnot capturedWin/Linux: Seen in the menu
Mac: Not captured
Move Circuit UpProjectCtrl+Shift+U⇧⌘UWin/Linux: Seen in the menu
Mac: Seen in the menu
Move Circuit DownProjectCtrl+Shift+D⇧⌘DWin/Linux: Seen in the menu
Mac: Seen in the menu
Auto-PropagateSimulateCtrl+Enot capturedWin/Linux: Seen in the menu
Mac: Not captured
Single-Step PropagationSimulateCtrl+Inot capturedWin/Linux: Seen in the menu
Mac: Not captured
Reset SimulationSimulateCtrl+R⌘RWin/Linux: Pressed in the lab
Mac: Seen in the menu
Manual Tick Half CycleSimulateCtrl+Tnot capturedWin/Linux: Pressed in the lab
Mac: Not captured
Manual Tick Full CycleSimulateCtrl+F9⌘F9Win/Linux: Seen in the menu
Mac: Seen in the menu
Auto-Tick EnabledSimulateCtrl+Knot capturedWin/Linux: Pressed in the lab
Mac: Not captured
MinimizeWindowCtrl+Shift+M⇧⌘MWin/Linux: Seen in the menu
Mac: Seen in the menu
Close (window)WindowCtrl+Shift+Wnot capturedWin/Linux: Seen in the menu
Mac: Not captured
Find Action…HelpCtrl+Shift+A⇧⌘AWin/Linux: Seen in the menu
Mac: Seen in the menu

Change a shortcut

Open File, then Preferences, then the Hotkey settings tab. The tab exists in 5.0.0 (F47). On a Mac, Preferences is called Settings and sits in the Logisim-evolution menu, opened with ⌘, (F64). The project’s notes say shortcuts became rebindable in 3.9.0; we did not rebind one.

Zoom, pan and find your circuit again

Hold Ctrl and turn the wheel to zoom, or use the slider and the buttons under it. In our run three notches up took the readout from ×1 to ×1.3 and three notches down brought it back (F94).

Mouse and keyboard gestures
Zoom in or outCtrl with the mouse wheel, or the zoom slider and buttons at the bottom leftpressed (Linux lab, F94)
Rotate the selected componentArrow keys (Up, Down, Left, Right set its Facing)pressed (Linux lab, F94)
PanScroll bars and the wheelnot tested
Pinch to zoom on a trackpadnot tested

To find a circuit that is off screen, zoom out. We did not look for a zoom-to-fit command, so we do not claim one.

Rotate, move, copy and label

Select a component with the Edit tool and press an arrow key: the key sets the direction it faces. The wires then no longer meet its pins, so reconnect them (F94). Ctrl+D copies the selection on top of itself; drag the copy away. Undo reverses both.

LAB lab-lnx · Linux lab5.0.02026-11-11

Six crops of the same half-adder circuit in a row of two by three. First: the AND gate selected. Second: after the Up arrow, the gate faces north and its output wire is red. Third: after Ctrl+Z, the gate faces east again. Fourth: after Ctrl+Shift+Z, north again. Fifth: after Ctrl+Z and Ctrl+D, a second gate drawn on top of the first. Sixth: after Ctrl+Z, a single gate.

Arrow key, undo, redo and duplicate in the 5.0.0 window on the Linux lab (F94). Six crops from one session, left to right and top to bottom.lab-lnx-le500-shortcuts-rotate-undo-01
Six crops of a half adder showing a gate selected, rotated, undone, redone, duplicated and undone again.

Labels are set in the Properties panel, or with the Text tool (the large A in the toolbar).

Preferences that matter

File, then Preferences on Windows and Linux. On a Mac it is Logisim-evolution, then Settings. The window has ten tabs: Experimental, Software, FPGA Commander Settings, Hotkey settings, Autosave, Template, International, Window, Layout and Simulation (F47). We captured the International tab only.

  • Window. Look and feel, zoom factor, application font and canvas colours. This is where dark looks are chosen.
  • Layout. What happens after you add a component, and how wires show values.
  • Simulation. Colour options, including a colour-blind set. See wire colours.
  • Autosave. Enable it and set an interval. Classic 2.7.1 has no autosave.
  • Template. What a new project starts with. The command-line option -u selects one; see Command line reference.

Dark mode

Logisim-evolution has dark looks, and the 5.0.0 notes say canvas colours work much better in them. A setting that follows your system’s light or dark mode is not in 5.0.0. Classic 2.7.1 has no dark mode. We have not captured the themes, so we show no comparison.

International: language and gate shape

LAB lab-lnx · Linux lab5.0.02026-11-09

The Preferences window of Logisim-evolution 5.0.0 on the International tab. Tabs read Experimental, Software, FPGA Commander Settings, Hotkey settings, Autosave, Template, International, Window, Layout and Simulation. A Gate shape drop-down shows ANSI, and a Language list names twelve languages.

Preferences, International tab, on the Linux lab (F47).lab-lnx-le500-preferences-international-01
Preferences window on the International tab: Gate shape ANSI and a list of twelve languages.

The International tab lists twelve languages: German, Greek, English, Spanish, French, Portuguese, Russian, Italian, Dutch, Japanese, Polish and Chinese, and a gate shape setting that reads ANSI in our capture, with IEC as the other choice (F47). The command-line options -o for the language and -g for the gate style do the same at start-up. We did not test whether they persist. The project’s notes say the Chinese locale code changed from cn to zh in 3.9.0.

Big screens and tiny text

We have not tested the operating-system display scaling on Windows or Mac, so we give no steps for it. On the Linux lab we started the jar with Java’s scale option. The menus, tabs, icons and circuit tree drew at twice the size, but the circuit on the canvas stayed at its normal scale, so it looked half as large next to the interface (F71). Zoom the canvas with the slider to compensate.

Terminal
java -Dsun.java2d.uiScale=2 -jar logisim-evolution-5.0.0-all.jar
LAB lab-lnx · Linux lab5.0.02026-11-11

Logisim-evolution 5.0.0 started with the Java option sun.java2d.uiScale=2. Menus, tabs and the circuit tree are drawn at twice the normal size, while the half-adder circuit in the canvas at the right is drawn very small next to them.

With uiScale=2 the interface text and icons double, but the circuit canvas keeps its old pixel scale, so the circuit looks half as large next to the interface. Use the zoom buttons below the tree to compensate.lab-lnx-le500-hidpi-uiscale2-01
Logisim started with uiScale=2: menus and tabs are drawn twice as large while the circuit stays small.

Reset all preferences

Start Logisim once with --clear-prefs. The Windows uninstaller leaves settings in place, so a reinstall does not reset them (F26).

Terminal
java -jar logisim-evolution-5.0.0-all.jar --clear-prefs

Menu items such as Export Image have no shortcut; see export images and print.

Frequently asked questions

How do I zoom in Logisim?

Hold Ctrl and turn the mouse wheel, or use the zoom slider and buttons at the bottom left of the window. On the Linux lab, three notches of Ctrl plus wheel took the readout from ×1 to ×1.3 (F94).

How do I rotate a component?

Select it with the Edit tool and press an arrow key; each arrow sets which way it faces. In our test, Up turned an AND gate to face north (F94). You can also change its Facing attribute in the Properties panel.

How do I undo in Logisim?

Ctrl+Z to undo and Ctrl+Shift+Z to redo, ⌘Z and ⇧⌘Z on a Mac. We pressed both on the Linux lab and saw the change reverse and return (F94).

Does Logisim have dark mode?

Logisim-evolution offers dark looks, and the 5.0.0 notes say canvas colours work much better in them. We did not capture the themes ourselves. Classic 2.7.1 has no dark mode. A setting that follows your system is not in 5.0.0.

How do I change the language?

Open Preferences and choose the International tab. It lists twelve languages and a gate shape choice of ANSI or IEC (F47). You may need to restart.

How do I make the text bigger on a 4K screen?

Logisim-evolution has zoom for the canvas and a font setting in its Window preferences according to the project's documentation. We did not test high-DPI scaling on a Windows or Mac display, so we do not give steps for it.

How do I reset Logisim's settings?

Start it once with --clear-prefs. Settings live outside the program folder, so uninstalling does not remove them on Windows (F26).

Sources

  1. Logisim-evolution user guide, Logisim-evolution project, accessed 9 Nov 2026
  2. Menus and shortcuts as read in 5.0.0, logisim.dev lab data: test-data/FINDINGS.md F46, F47, F62, F64, F94

Try: , , ,