Choose a project
Describe this circuit
Components: Input pin A; Splitter 1; Input pin B; Splitter 2; Input pin Cin; fa fa0; fa fa1; fa fa2; fa fa3; Splitter 3; Output pin S; Output pin Cout.
- Input pin A connects to Splitter 1 (net A), 4 bits wide.
- Splitter 1 connects to fa fa0 (net A0).
- Splitter 1 connects to fa fa1 (net A1).
- Splitter 1 connects to fa fa2 (net A2).
- Splitter 1 connects to fa fa3 (net A3).
- Input pin B connects to Splitter 2 (net B), 4 bits wide.
- Splitter 2 connects to fa fa0 (net B0).
- Splitter 2 connects to fa fa1 (net B1).
- Splitter 2 connects to fa fa2 (net B2).
- Splitter 2 connects to fa fa3 (net B3).
- Input pin Cin connects to fa fa0 (net Cin, c0).
- fa fa0 connects to Splitter 3 (net s0).
- fa fa0 connects to fa fa1 (net c1).
- fa fa1 connects to Splitter 3 (net s1).
- fa fa1 connects to fa fa2 (net c2).
- fa fa2 connects to Splitter 3 (net s2).
- fa fa2 connects to fa fa3 (net c3).
- fa fa3 connects to Splitter 3 (net s3).
- fa fa3 connects to Output pin Cout (net c4, Cout).
- Splitter 3 connects to Output pin S (net S), 4 bits wide.
Describe this circuit
Components: Input pin A; Splitter 1; Input pin B; Splitter 2; Input pin Binv; Input pin Op; alu1 cell0; alu1 cell1; alu1 cell2; alu1 cell3; Splitter 3; Output pin R; Output pin Cout; NOR Gate 1; Output pin Z; XOR Gate 1; Output pin V.
- Input pin A connects to Splitter 1 (net A), 4 bits wide.
- Splitter 1 connects to alu1 cell0 (net A0).
- Splitter 1 connects to alu1 cell1 (net A1).
- Splitter 1 connects to alu1 cell2 (net A2).
- Splitter 1 connects to alu1 cell3 (net A3).
- Input pin B connects to Splitter 2 (net B), 4 bits wide.
- Splitter 2 connects to alu1 cell0 (net B0).
- Splitter 2 connects to alu1 cell1 (net B1).
- Splitter 2 connects to alu1 cell2 (net B2).
- Splitter 2 connects to alu1 cell3 (net B3).
- Input pin Binv connects to alu1 cell0, alu1 cell1, alu1 cell2, alu1 cell3 (net Binv, bi, c0).
- Input pin Op connects to alu1 cell0, alu1 cell1, alu1 cell2, alu1 cell3 (net Op, op), 2 bits wide.
- alu1 cell0 connects to Splitter 3, NOR Gate 1 (net r0).
- alu1 cell0 connects to alu1 cell1 (net c1).
- alu1 cell1 connects to Splitter 3, NOR Gate 1 (net r1).
- alu1 cell1 connects to alu1 cell2 (net c2).
- alu1 cell2 connects to Splitter 3, NOR Gate 1 (net r2).
- alu1 cell2 connects to alu1 cell3, XOR Gate 1 (net c3).
- alu1 cell3 connects to Splitter 3, NOR Gate 1 (net r3).
- alu1 cell3 connects to Output pin Cout, XOR Gate 1 (net c4, Cout).
- Splitter 3 connects to Output pin R (net R), 4 bits wide.
- NOR Gate 1 connects to Output pin Z (net Z).
- XOR Gate 1 connects to Output pin V (net V).
Not sure your Logisim can open these files? Check your version in Help, About, then use the version picker. Wires grey after opening a file? Click once on the canvas or press Ctrl+R (F45).
Two learning paths
| Combinational to processor | Tutorial, adders, ALU, then CPU and RISC-V when published | Build arithmetic from gates and chain it into an ALU. |
|---|---|---|
| Sequential | Flip-flops, counter, then FSM and clock projects when published | Build counters and a state machine and view them in a timing diagram. |
No rows match.
Start with the tutorial, then the adders. Sequential readers can start with flip-flops and the counter.
What every project gives you
- Milestone
.circfiles saved by 5.0.0, with classic 2.7.1 twins where we made them. - A test vector file per circuit. Run it in Simulate, Test Vector, or on the command line; read
Failed: 0in the text, not the exit code (F17, test vectors). - Truth tables and diagrams drawn from the verified files.
- A common-mistakes section.
Small examples on other pages
No examples match.
Project ideas for after these
- Vending machine: a finite state machine; use the method of the traffic light project when it is published.
- 4-bit multiplier from adders: start from the adders and the arithmetic parts.
- BCD to 7-segment: use the decoder generator.
- Stopwatch with a lap register: counters and a register.
- Keyboard to TTY echo, LED-matrix games: people build these; they are large and we have not published one.
- FPGA version of a counter: see the FPGA guide.
Using these projects in a course
If you are a student: compare your circuit with ours, do not submit ours. Check your own file with the same test vectors. Teachers: the files are CC BY 4.0 and the vectors make marking easy; see for teachers and test vectors.